CrossFire SX

CrossFire IX

CrossLink TG

CrossLink TG

Download area
Request Demo
Crosslink TG Web

CrossLink TG

ADVANCED TELEMATICS CONTROLLER

The CrossLink TG is a powerful ARM based telematics unit capable of running advanced data logging and providing cloud connectivity applications as a gateway unit.

Leaflet

It accesses data from the vehicle control system via CAN, Ethernet and direct sensor inputs and can communicate via Wi-Fi, Bluetooth and 3G/4G and supports global GNSS positioning. CrossLink TG comes with a custom Linux OS and the open and modular LinX Software Suite. The soft telematics controller can facilitate updates of machine control system software distributed from the cloud.

Download area

SPECIFICATION

Below you find an overview specification of CrossLink TG The same information is found in the product leaflet which is available for download and in printed form. Please note that product information may change over time and the latest and correct information is always found on this website. You find additional information in the technical manual and software manuals.

DOWNLOAD SPECIFICATION
Crosslink TG product measurement
KERNEL
PROCESSOR ARM Cortex A8 32bit 800MHz
MEMORY Internal: 1GB Flash, 512MB DDR3 RAM
EXPANSION MicroSD Card Slot
SYSTEM Linux 4.19.94
SOFTWARE Debian 10 Distribution
HMI
STATUS LED 4 freely programmable status LEDs
KEY SWITCH For power control
WIRED COMMUNICATION INTERFACES
CAN 2 x CAN FD
COM 1 x RS232
ETHERNET Yes
TPM TPM 2.0
WIRELESS COMMUNICATION INTERFACES
UMTS/HSPA + (3G) GSM/GPRS/EDGE: Quad band 850/900/1800/1900MHz UMTS/HSPA+: Five band 800/850/900/1900/2100MHz
LTE CAT1 (4G) Bands:B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/B19/B20/B25/B26/B28
BLUETOOTH v4.2
WIFI Dual band, 2.4 GHz and 5 GHz, IEEE 802.11 a/b/g/n/ac. Supports Client and Access point modes.
SENSORS
ACCELEROMETER Built-in 3-axis accelerometer, e.g. for detecting collisions, roll-overs or to monitor how a machine is driven.
14 X INPUTS
DIGITAL 10
ANALOG 4
VOLTAGE INPUT 50V max
FREQUENCY 3kHz max
ANALOG INPUT 12 bit resolution
10 X OUTPUTS
OPTIONS 8 open collector outputs (100mA each)
CAPACITIVE LOADS 2 high sided switches to Vin for Output, 1A each
MISCELLANEOUS All outputs have protection from short circuit and overload.
GNSS POSITIONING
RECEIVER GPS/GLONASS/QZSS/BeiDou/GALLILEO
CHANNELS 72
FEATURES SBAS: WAAS, EGNOS, MSAS, GAGAN, 4 Hz update rate, 2 meters CEP
POWER
VOLTAGE Nominal range 9V – 48V (4G option nominal range 9V to 36V)
POWER CONSUMPTION 0.2mA – 63mA, up to 300mA in extreme cases
BATTERY 10 year RTC backup. Rechargeable Li-Ion battery available as option.
ENVIRONMENT & CERTIFICATIONS
IP CLASS IP67
TEMPERATURE RANGE (ºC) -40 to +85
CERTIFICATIONS E-marking, CE Marking, PTCRB, FCC
ENCLOSURE
HOUSING Glass reinforced polyester
CONNECTORS TE 776163-1 (35 pins), USB host 2.0, RJ45. FAKRA antennas for 3G/4G and GNSS Micro SIM slot (eSIM (MFF2) available as option)
SIZE AND WEIGHT
W x H x D (mm) 149 x 135 x 58
WEIGHT (g) 400

DOCUMENTATION

The CrossLink TG is made to our specifications by Owasys, in addition to this we leverage their expertise in global communication protocols and IoT security to manage firmware and security updates, to achieve this in an efficient manner we have elected that Owasys build and maintain the firmware and CrossLink TG OS (based on Linux) and CrossControl adds our expertise to this package. If you are working at an OS or firmware level you will need to use their guides, files and patches, which can be found here - www.owasys.com/en/developers >

Product leaflet

CAD drawings

Diagnostics & telematics

CrossLink TG is a full fledged telematics gateway for collecting and computing diagnostic and operational data in a vehicle system and communicating data to cloud solutions and back-office systems.

Learn more
Crosslink TG

Knowledge BaseA great source of information that expands upon
the information outlined in our product manuals.
Here you can find project demos, code examples,
FAQs, and general product information for developers.

Learn more

Video trainingOur library of educational visual media for all
our software components. The guides can take
a user from getting started through to advanced
development for any of our products.

Videos

Field Application EngineeringOur Field Application Engineers are specialists in the capabilities of our products. They support customers with advice and examples on solutions and how to implement functionality in the most efficient way for different use cases and applications, based on our software platform.

Learn more

Application developmentOur application development services are provided by our experienced team with a broad range of experience of display and on-board computing solutions, including instrumentation, process control, guidance, video, telematics and more.

Learn more

Need a starter kit?We offer product starter kits that help you get going fast. 
You select which software to be pre-installed and the cable
adaptors you need and get all shipped in one bundle.

Learn more

Life Cycle ManagementAt CrossControl we have developed a robust product
Life Cycle Management policy that covers our
devices from initial inception to end-of-life status,
a period usually of 15 years.

Learn more