9. CCpilot VI
=======================================

This chapter covers features and behavior unique to the CCpilot VI.

============================================================
9.1 Status indication (Backlit soft keys and Buzzer)
============================================================

This section describes the basic default status indication behavior. Note that the backlit soft keys status indication behavior can be disabled totally and/or configured by user software through the CCAux API. Buzzer indication is currently non-configurable.

--------------------------------------
9.1.1 Startup sequence - main system
--------------------------------------

During startup to the main system, the status backlit soft keys and buzzer indications are as follows:

    • All 4 backlit soft keys are set to 13 % intensity, blinking at 2 Hz and buzzer makes short beep: Device start-up phase begins.

    • Operating system is then started, and specific service software begins to execute.

    • All 4 backlit soft keys are constant on, 13 % intensity: Device is operational.

---------------------------------------
9.1.2 Startup sequence - rescue system
---------------------------------------

During startup to the rescue system, the backlit soft keys and buzzer indications are as follows:

    • The 2 middle backlit soft keys are set to 50 % intensity, blinking at 0.5 Hz and buzzer makes short beep: Device start-up phase begins.

    • Operating system is then started, and specific service software begins to execute.

    • All 4 backlit soft keys are set to 100 % intensity, blinking at 2 Hz: Device is operational.

------------------------------------
9.1.3 Suspend
------------------------------------

When device is in suspend mode, the backlit soft keys and buzzer indications are as follows:

    • All 4 backlit soft keys are set to 13 % intensity, blinking at 0.2 Hz: System is suspended

    • Resume from suspended state by pressing a configured button or the external on/off signal.
      All 4 backlit soft keys are set to 100 % intensity, blinking at 2 Hz: Device is operational.

------------------------------------
9.1.4 Shutdown sequence
------------------------------------

Once shutdown (power button is pressed, or ignition signal released) is initiated:

    • All 4 backlit soft keys are set to 13 % intensity, blinking at 2 Hz and buzzer makes short beep: shutdown sequence has started.
    
    • Backlit soft keys are off: Device is off