10.  CCpilot X900
=======================================

This chapter covers features and behavior unique to the CCpilot X900.

============================================================
10.1 Status indication (LED)
============================================================

This section describes the basic default status indication behavior. Note that the status LED behavior can be disabled totally and/or configured by user software through the CCAux API.

------------------------------------
10.1.1 Startup sequence
------------------------------------

During startup, the status LED indications are as follows:

    • Flashing yellow at 1 Hz: pre-heating is activated and in effect, start-up is delayed while the device is heated.

    • Flashing yellow at 2 Hz: device start-up phase begins.

    • Operating system is then started, and specific service software begins to execute.

    • Static green: device is operational.

------------------------------------
10.1.2 Suspend
------------------------------------

When the device is in suspend mode, the status LED indications are as follows:

    • Flashing yellow at 0.2 Hz: system is suspended.

    • Flashing yellow at 2 Hz: system is resuming from suspend.

    • Static green: device is operational.

------------------------------------
10.1.3 Shutdown sequence
------------------------------------

Once shutdown (power button is pressed, or ignition signal released) is initiated:

    • Static yellow: device is shutting down, rebooting or entering suspend mode.

    • LED off: device is off.