------------------------------------------------------------------------ CrossControl CCpilot XA system release - 1.2.2.1 - for all product variants ------------------------------------------------------------------------ This is the unified release for all product variants (CCpilot XA/XS2.0, CrossCore XS2.0, Net+, MD, SD, BCU, with or without AI). These notes cover both firmware and software, and will list the known issues and workarounds. Individual release notes are available for each software artifact below, except API and applications, that are covered in a separated document. ------------------------------------------------------------------------ Content of release ------------------------------------------------------------------------ The system release is comprised of the following versions: Firmware: Front uC: 1.0.3.0 System Supervisor: 1.1.0.0 Linux image: ccpilot-xa-1.2.2.1 Devel package: ccpilot-xa-devel-1.2.2.1 API/Application software: CCAux API 2.6.1.0 CCSettings 2.6.1.0 ccsettingsconsole 2.6.1 build 257 TouchCalibrator 2.6.1.0 ccauxd 2.4.5.3134 ------------------------------------------------------------------------ Short notes ------------------------------------------------------------------------ ----------------------------- Front uC 1.0.3.0 2013-12-09 ----------------------------- Changes since 1.0.2.0: * Added support for XM/XS2.0 12" front PCB ----------------------------- System Supervisor 1.1.0.0 2014-01-24 ----------------------------- Changes since 1.0.8.0: * Fixed an issue on the SD variant, where the picture could become distorted after a power loss * Increased temperature range. Maximum temperature before emergency shutdown increased to 100 degrees C * Updated 12V supervision limits to 11-13V (from 11.4 - 12.6) * Updated CAN and Video power handling: * Up to 5 consecutive over-current conditions needed until power is turned off completely * If application software turns off and on the power, the failure counter will be reset * The delay is changed from 5s to 2s. If power can be turned on successfully after the delay, the failure counter will be reset ----------------------------- Linux OS 1.2.2.1 2014-02-07 ----------------------------- Changes since 1.2.1.0: * Added USB line printer driver (usblp) * Added TUN/TAP driver (tun) * Added links from more PPP-configuration files under /etc/ppp * Added Video_setGraphicsOverlay and Video_getGraphicsOverlay methods in CCAux API * Fixed password change issue with passwd * Fixed problem that CAN_RAW_LOOPBACK could not be disabled * Removed duplicate CAN drivers * Fixed problem with duplicate dhclient processes * Fixed problem related to network interface not losing its IP address after unplugging the cable ----------------------------- Devel package ccpilot-xa-devel-1.2.2.1 ----------------------------- * Includes development headers and libraries to compile applications for development board * Compiler and libc distributed separately by Mentor (Sourcery CodeBench) ------------------------------------------------------------------------ Known issues and limitations ------------------------------------------------------------------------ Linux: * "strstr" libc function not working correctly with strings containing hashes * CC Aux library filename is wrong (libcc-aux2.so.2.6.0, should be libcc-aux2.so.2.6.1) * Raw audio (wav) is the only supported audio format * Kernel crashes if running EGL application (es11ex, tiger) after using Qt eglnullws plugin * Soft keyboard not available, external USB keyboard required for such applications * Capslock/numlock not working with external USB keyboards (in Qt) * Not all external USB mouses work * Qt application issue when QWS application is started from command line ( -qws) * When plugging out USB input device, the application will hang Workaround: # -qws < /dev/zero