----------------------------------------------------------------------------------------------- Release Notes: CrossControl Linux (CC Linux) platform for CCpilot V700 The registered trademark Linux® is used pursuant to a sublicense from the Linux Foundation, the exclusive licensee of Linus Torvalds, owner of the mark on a world­wide basis. ----------------------------------------------------------------------------------------------- ------------------------------------ CC Linux v.2.0.0.1 2020-12-04 This is a hotfix-release that addresses an issue found in 2.0.0.0. ------------------------------------ Changes for CCpilot V700: Bugfixes: - RTC time set to incorrect hardware clock (scu, no backup battery). (Bug: #3298) ------------------------------------ CC Linux v.2.0.0.0 2020-11-20 This release is available for the following platforms: V700 (i.MX8 Crosscontrol Takhini Hardware) - Based on Yocto 3.0.1 Zeus - Kernel version: 5.4.47 - Uboot version: v2020.04 - CCAux API version: 2.17.5.0 ------------------------------------ Changes for CCpilot V700: Bugfixes: - Suspend and reboot cause error frames on CAN. (Bug: #3091) - Psplash rotation incorrect. (Bug: #3124) - MMC CQE cause random freezes. (Bug: #3205) - Watchdog caused forced reboot during shutdown. (Bug: #3215) - BSP package included reference to internal repository (Bug: #3279) Changes & updates: - CCLinux codename updated: CCLinux 2.0.0.0 Brant - Image built on latest NXP BSP for imx8. - Linux 5.4.47_2.2.0 - https://www.nxp.com/docs/en/release-note/IMX_LINUX_RELEASE_NOTES.pdf - Yocto based on 3.1 Zeus - SCU firmware updated to 1.6.0. - imx8 c0-variant support added, b0 support dropped. - b0 variant is not supported by NXP 5.4-kernels. - GCC 9.2 - Gstreamer 1.16.2-imx - GPU 6.4.3.p0.0 (With 5.6.1 SDK) - Weston 8.0.0 - OpenCV 4.2.0 - Added less to image and set default systemd pager. (Change: #3283) Deliverables: - CCpilot V700 image 2.0.0.0 (uuu, update and usb-stick) - CCpilot V700 bootloader 2.0.0.0 (for use with uuu) - CCpilot V700 BSP 2.0.0.0 - CCpilot V700 SDK 2.0.0.0 - Source, and license packages Known issues: - Bootup time increased ~2sec due to new kernel (Bug: 3274). ------------------------------------ CC Linux v.1.5.6.0 2020-09-30 This release is available for the following platforms: V700 (i.MX8 Crosscontrol Takhini Hardware) - Based on Yocto 2.7.3 Warrior - Kernel version: Linux v700 4.19.35+g0f9917c56d59 - Uboot version: U-boot 2019.04-4.19.35. - CCAux API version: 2.17.5.0 ------------------------------------ Changes for CCpilot V700: Bugfixes: - General bugfixes related to internal issues. - SCU Firmware update to allocate CAN-pins (Bug: #3140) - Removed preceeding "v" from version numbering. (Bug: #3125) - Several API bugfixes. (Bug: #3004, #3005, #3006) - Touch driver hang on boot if display not connected. (Bug: #2968) - Fullup.sh did not correctly update device tree file for rescue. (#3157) Changes & updates: - Multiple documentation and manual updates. - Corrected power-up sequence for display. (Support: #2821) - Added support for display, and PCAP reset signals for new HW. (Change: #3068, #3079) - Removed cursor on startup. (Change: #3059) - Added information about timed shutdown for ccsettingsconsole. (Change: #3059) - Removed ccvncserver from image. (Change: #1435) Deliverables: - CCpilot V700 image 1.5.6.0 (uuu, update and usb-stick) - CCpilot V700 bootloader 1.5.6.0. (for use with uuu) - CCpilot V700 SDK 1.5.6.0 - CCpilot V700 BSP 1.5.6.0 Known issues: - Reboot and suspend will cause error frames on CAN bus on older HW. - Weston will start on V700, due to bug with BSP build. - ADC voltages are mapped to invalid names. - Unmounting USB does not remove mounted directories. ------------------------------------ CC Linux v.1.5.5.0 2020-05-30 This release is available for the following platforms: V700 (i.MX8 Crosscontrol Takhini Hardware) ------------------------------------ Changes for CCpilot V700: Bugfixes: - General bugfixes related to internal issues. - Fixed LCD poweron sequence (Bug: #2762) - Fixed set of rescue system MAC. (Bug: #2661) - Added libtiff in to image. (Bug: #2664) - Fixed suspend on IGN. (Bug #2694) - Fixed several bugs in api handling. (Bugs: #2694, #2696, #2697) - Added wayland-scanner in to image. (Bug: #2719) - Updated Power-on sequence for LCD. (Bugs: #2713, #2762) - Fixed ccsnbr on boot. (Bugs: #2782, #2799) - System state is indcated on login. (Bug: #2820) - Fixed invalid usbmount warning in rescue. (Bug: #2872) - Fixed watchdog. (Bug: #2874, #2891) - Added paths to profile. (Bug: #2879) - Added reboot after updating rescue. (Bug: #2880) - Added missing libraries in to image. (Bug: #2932) - Changed DHCP-ID for main system to match rescue. (Bug: #2951) - Fullup.sh did not update device tree. (Bug: #3069) - BSP versioning convention updated. (Bug: 3068) Changes & updates: - Official first release for V700, built from BSP. (Feature #2722) - Disabled getty at startup. (Change: #2654) - Corrected HW screen rotation. (Change: #2712) - Added configurable boot led support. (Feature: #2988) - Added eeprom verification. (Feature: #2144) - Support for settable startup voltage. (Feature, #2306) - pSLC support configurable with uuu. (Feature #2569) Deliverables: - CCpilot V700 image 1.5.5.0 (uuu, update and usb-stick) - CCpilot V700 bootloader 1.5.5.0. (for use with uuu) - CCpilot V700 SDK 1.5.5.0 - CCpilot V700 BSP 1.5.5.0 Known issues: - Touch driver might freeze if device not available. (Bug: #2968)