8. CCpilot VS

This chapter covers features and behavior unique to the CCpilot VS.

8.1 Status indication (LED and Buzzer)

This section describes the basic default status indication behavior. Note that the status indication behavior can be disabled totally and/or configured by user software through the CCAux API.

8.1.1 Startup sequence - main system

During startup to the main system, the status LED (embedded in the power button) and buzzer indications are as follows:

  • Status LED is blinking yellow at 2 Hz and buzzer makes short beep: Device start-up phase begins.

  • Operating system is then started, and specific service software begins to execute.

  • Status LED is constant green: Device is operational.

8.1.2 Startup sequence - rescue system

During startup to the rescue system, the status LED and buzzer indications are as follows:

  • Status LED is constant orange and buzzer makes short beep: Device start-up phase begins.

  • Operating system is then started, and specific service software begins to execute.

  • Status LED is blinking green at 2 Hz: Device is operational.

8.1.3 Shutdown sequence

Once shutdown (power button is pressed, or ignition signal released) is initiated:

  • Status LED is blinking blue 2 Hz and buzzer makes short beep: shutdown sequence has started.

  • Status LED is off: Device is off