9. CCpilot VI

This chapter covers features and behavior unique to the CCpilot VI.

9.1 Status indication (Backlit soft keys and Buzzer)

This section describes the basic default status indication behavior. Note that the backlit soft keys status indication behavior can be disabled totally and/or configured by user software through the CCAux API. Buzzer indication is currently non-configurable.

9.1.1 Startup sequence - main system

During startup to the main system, the status backlit soft keys and buzzer indications are as follows:

  • All 4 backlit soft keys are set to 13 % intensity, blinking at 2 Hz and buzzer makes short beep: Device start-up phase begins.

  • Operating system is then started, and specific service software begins to execute.

  • All 4 backlit soft keys are constant on, 13 % intensity: Device is operational.

9.1.2 Startup sequence - rescue system

During startup to the rescue system, the backlit soft keys and buzzer indications are as follows:

  • The 2 middle backlit soft keys are set to 50 % intensity, blinking at 0.5 Hz and buzzer makes short beep: Device start-up phase begins.

  • Operating system is then started, and specific service software begins to execute.

  • All 4 backlit soft keys are set to 100 % intensity, blinking at 2 Hz: Device is operational.

9.1.3 Suspend

When device is in suspend mode, the backlit soft keys and buzzer indications are as follows:

  • All 4 backlit soft keys are set to 13 % intensity, blinking at 0.2 Hz: System is suspended

  • Resume from suspended state by pressing a configured button or the external on/off signal. All 4 backlit soft keys are set to 100 % intensity, blinking at 2 Hz: Device is operational.

9.1.4 Shutdown sequence

Once shutdown (power button is pressed, or ignition signal released) is initiated:

  • All 4 backlit soft keys are set to 13 % intensity, blinking at 2 Hz and buzzer makes short beep: shutdown sequence has started.

  • Backlit soft keys are off: Device is off