10. CCpilot X900

This chapter covers features and behavior unique to the CCpilot X900.

10.1 Status indication (LED)

This section describes the basic default status indication behavior. Note that the status LED behavior can be disabled totally and/or configured by user software through the CCAux API.

10.1.1 Startup sequence

During startup, the status LED indications are as follows:

  • Flashing yellow at 1 Hz: pre-heating is activated and in effect, start-up is delayed while the device is heated.

  • Flashing yellow at 2 Hz: device start-up phase begins.

  • Operating system is then started, and specific service software begins to execute.

  • Static green: device is operational.

10.1.2 Suspend

When the device is in suspend mode, the status LED indications are as follows:

  • Flashing yellow at 0.2 Hz: system is suspended.

  • Flashing yellow at 2 Hz: system is resuming from suspend.

  • Static green: device is operational.

10.1.3 Shutdown sequence

Once shutdown (power button is pressed, or ignition signal released) is initiated:

  • Static yellow: device is shutting down, rebooting or entering suspend mode.

  • LED off: device is off.